Bucket Washers

Bucket washers are high-efficiency washing equipment that work on the principle of washing sand and fine aggregate and separating them from water and fine particles through a rotating bucket wheel system. After the sand and water mixture is fed into the washing tank, the rotating bucket wheel lifts the material from the water and carries it upward, and during this process, clay and fine particles are separated from the water. While the separated fine materials and excess water are removed from the system through overflow, the cleaned sand is dewatered through buckets and conveyed to the discharge point. In this way, product quality is improved, moisture content is reduced, and suitable material conditions are provided for subsequent processes.

Log Washer

Log washer is a high-performance washing equipment that works on the principle of removing clay, mud and sticky dirt by subjecting the material to intense friction effect thanks to its dual shaft and paddle mixing system. After the material and water mixture is fed into the washing tank, the paddles on the counter-rotating dual shafts strongly mix the material and the dirt layer on the surface is separated by friction between particles. While the separated dirty water and fine materials are removed from the system through overflow, the cleaned material is taken from the discharge section and transferred to the next process. Thanks to this structure, highly efficient cleaning is achieved and product quality is optimized.

Spiral Washers

Spiral washers are effective washing equipment that operate on the principle of removing clay, silt, and fine particles by continuously moving material in water with the aid of a rotating spiral shaft. Material is fed into the washing tank together with water and is continuously mixed thanks to the rotation of the spiral, allowing dirt and fine particles on the surface to be released. While separated fine particles and dirty water are removed from the system through overflow, the cleaned material is transported upward by the spiral movement. At the end of this process, the dewatered and cleaned product is taken from the discharge point and brought to the appropriate quality level for subsequent processes.